BD Venflon pro safety 20g IV Cannula, (Box of 50)

BD venflon 20g has been developed to minimize the risk of unanticipated blood splash and needle stick injuries. This Venflon 20goffers robust needle tip protection and encapsulates the entire tip of the needle. 

The BD Vialon biomaterial is used to manufacture this venflon 20g that decrease cannula-related problems. BD Venflon Pro Safety 20g iv cannula has a combined injection port, valve, and snap cap. It is sterile, latex-free, PTFE, ported, winged, and designed for single-use, however it is also compatible with BD Luer-Slip and Luer-Lock.

Key features of BD venflon pro safety 20g :

• BD venflon 20g has been developed to minimize the risk of unanticipated blood splash and needle stick injuries.
• This venflon no. 20 offers robust needle tip protection and encapsulates the entire tip of the needle.
• Venflon pro safety 20g offers ease of penetration (small or fragile veins)
• It is available in gauge sizes of 14/16/18/20G and needle lengths of 25/32/45 mm.
• Venflon pro safety 20g come in a standard packing of 50 units per box.

Specifications Of BD Venflon pro safety 20g :

Venflon iv cannula 20g (Pink) are used to perform the following functions:

• Regular blood sampling
• Monitoring and administration of intravenous fluids.
• Administration of chemotherapy drugs through the IV route
• Channel for IV nutrition and IV control of radiologic agents, such as those used in magnetic resonance imaging (MRI)
• CT scans (computed tomography) and nuclear imaging
• The cannula will be removed after your treatment ends. It is recommended to replace the cannula if it is not working properly. It should be replaced routinely, if still in use, every 72 hours.

How to use Venflon No 20:

• Comply to Aseptic Non-Touch Technique (ANTT) throughout the procedure.
• Disinfect the injection site with ethanol or sprit.
• Remove the cannula from the packaging and fold down the wings.
• Hold and remove the needle cover. Insert the cannula at a low angle appropriate to the vein depth. Upon primary flashback lower the angle almost parallel to the skin.
• Advance the cannula slightly, two to three millimetres, to ensure the cannula tip is in the vein. Stabilise the cannula, and ease the needle back two to three millimetres.
• Secondary flashback between the needle and cannula will confirm correct placement in the vein. Advance the cannula off the needle and insert it completely into the vein. 

How to remove Venflon 20G:

• Stabilise the cannula. Occlude the vein just above the cannula tip and withdraw the needle holding the needle grip or grip plate. The safety mechanism will then be activated.
• Do NOT hold onto the needle protection shield.
• Dispose of the needle in a sharps container.
• Close the IV access with the end cap or add a needle-free connector extension set as per your hospital policy. Apply a sterile IV dressing. Flush the cannula to verify correct placement in the vein and prevent occlusion.