Allied Medical Cardiasafe Biphasic Defibrillator Monitor

Product Details:

Specifications:

General:

• Display:  7” Blue LCD with LED backlit , 320 x 240 pixels
• Display area: 120mm x 90mm
• Dimensions: H180 x W230 x D210mm (max.) without Paddle
• Weight: 4.5 Kgs

Defibrillator:

• Operating Mode: Manual
• Waveform: Biphasic
• Energy: 2 to 200 joules in 12 steps
• Synchronous: Energy delivery begins within 60 ms of the QRS Peak
• Charging Time: Less than 8 seconds
• Paddle Assembly: External paddle assembly with coil retractable high voltage cable Adults & Pediatric paddle integrated to the same handle
• Check Mode: Manual test mode
• Operation: By front Panel keyboard and paddle buttons

ECG:

• Frequency Response: 0.5 Hz to 40 Hz (ECG)
• Frequency Response: 0.5 Hz to 30 Hz (Paddle)
• Patient isolation: Optical isolation
• Lead selection: Lead I, II and III
• Gain setting: 0.5, 1.0 and 2.0
• CMRR: > 90 db
• Sweep Speed: 12.5, 25.0, 50.0 mm/sec
• Waveform 1: ECG
• Waveform 2: 4sec delayed (cascaded)
• Data Output: Analog output of ECG
• Digital filter: Digital signal processing for good quality of ECG
• Freeze mode: To freeze last 4 seconds ECG

Heart Rate:

• Range: 30-250 BPM
• Accuracy: ± 2 BPM
• Resolution: 1 BPM
• Tone: Beep on every QRS detected
• Low Alarm Limit Range: 30-245 (step of 5)
• High Alarm Limit Range: 40-250 (step of 5)

Printer:

• Paper Type: Thermal paper 50/55 mm width, 20 meters length
• Event Printing
• ECG Mode: Prints 5 Seconds pre & post ECG
• ECG in Defib
• Mode: Prints 5 Seconds pre & post ECG
• Defib Mode: Stores & prints 10 Seconds of Defib Shock data i.e. 5 seconds pre-critical & 5 seconds post critical Maximum events that can be store Memory of 10
• Manual Defib
• Check Mode: Prints the status of Check Mode
• Print Annotates: Time, Date, ECG Lead, Mode, Shock Status & selected Energy
• Delay: 10 Seconds

Power Supply (AC Mains Through Adaptor):

• Input: 150-276VAC, 50Hz, 60Hz, 12V DC for ambulance
• Output: 17V@4A
• Battery: 12V/3.8 Ah Rechargeable
• Backup time: 3 hours min on full charge in ECG mode /50 shocks of 150 Joules in defib mode
• Power consumption: 30 Watts (max) in ECG mode

Optional Items :

• Non-Invasive Pacing
• SPO2
• NIBP
• AED
• EtCO2 Monitoring

Environmental Conditions:

• Operating Temp: (-)5 ⁰C ~ (+)50 ⁰C
• Heart Rate Humidity: Up to 95 % non-condensing

Additional Information:

• Item Code: Cardiasafe
• Delivery Time: 2-4 weeks
• Packaging Details: Domestic/ Export Worthy